EnigmA Amiga Run 1997 July/EnigmA AMIGA RUN 20 (1997)(G.R. Edizioni)(IT)[!][issue 1997-07 & 08][EAR-CD IV].iso/lightwave/lwmlist/95.lightwave-10/001410_owner-lightwav…mail.webcom.com_Wed Oct 25 09:52:47 1995.msg

Internet Message Format | 1995-11-07 | 2KB

Received: by mail.webcom.com
    (1.37.109.15/16.2) id AA165889967; Wed, 25 Oct 1995 09:52:47 -0700
Return-Path: <[e-mail]>
Received: from emout05.mail.aol.com by mail.webcom.com with ESMTP
    (1.37.109.15/16.2) id AA165669957; Wed, 25 Oct 1995 09:52:38 -0700
Received: by emout05.mail.aol.com (8.6.12/8.6.12) id MAA02423; Wed, 25 Oct 1995 12:44:40 -0400
Date: Wed, 25 Oct 1995 12:44:40 -0400
From: [e-mail]
Message-Id: <[e-mail]>
To: [e-mail]
Cc: [e-mail]
Subject: Re: Par Problems
Sender: [e-mail]
Precedence: bulk

[e-mail] writes:

> I also
>own a TBC IV, which according to the installation docs, should be mounted
>in the slot right next to the PAR card.  For the first few months, I was
>experiencing some flashing, some crashing, some IDE lockups and the
>like.  I was negotiating with DPS, Micropolis and my dealer for a quick
>fix.  Upon popping the hood one day after a very hard crash, it became
>apparent that the boards were way too hot.  I moved the TBC IV over by
>one slot, (just about had enough length on the hopper between the boards)

When setting up my Toaster Oven I experimented with several configurations.
I've replaced the stubby cable provided by DPS with a standard 12 inch SCSI
cable. This allowed me to move the TBC IV into the PC power slots, about
6 or 7 inches below the PAR. Comparing throughput for each configuaration,
I also saw a very slight improvement in picture clarity when the boards were
separated by more than a couple inches.

Dan Esmond
Animagic
Austin, TX
http://www.eden.com/~animagic

--
[e-mail] sent this message.
To Post a Message           : [e-mail]
Un/Subscription Requests To : [e-mail]
(DIGEST)                 or : [e-mail]
Administrative Items To     : [e-mail]